TIM_OC4Init のバックアップ(No.1)

[ トップ ]   [ 新規 | 一覧 | 検索 | 最終更新 | ヘルプ | ログイン ]

• バックアップ一覧
• 差分 を表示
• 現在との差分 を表示
• ソース を表示
• TIM_OC4Init へ行く。
  • 1 (2011-03-14 (月) 13:46:40)
  • 2 (2011-05-16 (月) 11:34:33)

---

ファームウェア関数一覧

TIM_OC4Init †

ヘッダ宣言 †

関数プロトタイプ †

void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)

動作 †

引数 †

• TIMx
  TIM1,2,3,4,5,8を指定
• uint16_t TIM_OCInitStruct
  • uint16_t TIM_OCMode

    TIM_OCMode_Timing	TIM Output Compare Timing mode.
    TIM_OCMode_Active	TIM Output Compare Active mode.
    TIM_OCMode_Inactive	TIM Output Compare Inactive mode.
    TIM_OCMode_Toggle	TIM Output Compare Toggle mode.
    TIM_OCMode_PWM1	TIM Pulse Width Modulation mode1.
    TIM_OCMode_PWM2	TIM Pulse Width Modulation mode2.

  • uint16_t TIM_OutputState

    TIM_OutputState_Disable	Disables the TIM Output Compare state.
    TIM_OutputState_Enable	Enables the TIM Output Compare state.

  • uint16_t TIM_OutputNState

    TIM_OutputNState_Disable	Disables the TIM Output N Compare state.
    TIM_OutputNState_Enable	Enables the TIM Output N Compare state.

  • uint16_t TIM_Pulse
    0x0000 ～ 0xFFFF
    
  • uint16_t TIM_OCPolarity

    TIM_OCPolarity_High	Sets the TIM Output Compare polarity to high.
    TIM_OCPolarity_Low	Sets the TIM Output Compare polarity to low.

  • uint16_t TIM_OCNPolarity

    TIM_OCNPolarity_High	Sets the Output Compare N Polarity to high.
    TIM_OCNPolarity_Low	Sets the Output Compare N Polarity to low.

  • uint16_t TIM_OCIdleState

    TIM_OCIdleState_Set	TIM Output OC Idle state set when MOE = 0
    TIM_OCIdleState_Reset	TIM Output OC Idle state reset when MOE = 0

  • uint16_t TIM_OCNIdleState

    TIM_OCNIdleState_Set	TIM Output OCN Idle state set when MOE = 0
    TIM_OCNIdleState_Reset	TIM Output OCN Idle state reset when MOE = 0

戻り値 †

• 無し

場所 †

呼び出し関数 †

• 無し

サンプル †

/* Configures the TIM1 Channel4 in PWM Mode */
TIM_OCInitTypeDef TIM_OCInitStructure;
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0x7FF;
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
TIM_OC4Init(TIM1, &TIM_OCInitStructure);
/* Configures the TIM3 Channel4 in PWM Mode */
TIM_OCInitTypeDef TIM_OCInitStructure;
TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
TIM_OCInitStructure.TIM_Pulse = 0x7FF;
TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_Low;
TIM_OC4Init(TIM3, &TIM_OCInitStructure);

参照 †

• RCC_APB1PeriphClockCmd→TIM_TimeBaseInit→TIM_ITConfig→TIM_Cmd
• NVIC_Init→NVIC_IRQChannel
• STMマイコン徹底入門 P.

     

Site admin: T-4

PukiWiki 1.5.2 © 2001-2019 PukiWiki Development Team. Powered by PHP 7.4.3-4ubuntu2.20. HTML convert time: 0.016 sec.